xmas-2024

Machining

Machining
Cylinder Head Rebuild Standard VW Wasserboxer, Set
Cylinder Head Rebuild Standard VW Wasserboxer, Set
Regrind heads, resurface grind seats, cut valve seats , rebuild valves, new valve guides, price for two heads.
Attention:
All parts must deliver disassembled and cleaned.
Otherwise we can not machine your parts or only for additional cost.
600,00 EUR
incl. 19% tax excl. Shipping costs
Resurfacing waterboxer heads
Resurfacing waterboxer heads
Resurfacing waterboxer heads cylinder sealing and water jacked surface
205,00 EUR
incl. 19% tax excl. Shipping costs
Replace 4 valve guides inlet or exhaust
Replace 4 valve guides inlet or exhaust
Replace 4 valve guides inlet or exhaust (2 cylinder heads).
Oversize for additional costs.
 
150,00 EUR
incl. 19% tax excl. Shipping costs
Replace tapered race inlet guides
Replace tapered race inlet guides
Replace tapered race inlet guides (2 clinder heads).
Oversize for additional costs.
180,00 EUR
incl. 19% tax excl. Shipping costs
Replace and produce 1 valve guide inlet or exhaust
Replace and produce 1 valve guide inlet or exhaust
Replace and produce 1 valve guide if needed, inlet or exhaust.
Price for one piece!
34,47 EUR
incl. 19% tax excl. Shipping costs
Grind 4 valves
Grind 4 valves
Grind 4 valves 45° sealing surface
28,00 EUR
incl. 19% tax excl. Shipping costs
Grind 4 valve tips
Grind 4 valve tips
Grind 4 valve tips
20,00 EUR
incl. 19% tax excl. Shipping costs
Test 8 valve springs
Test 8 valve springs
Test 8 valve springs
20,00 EUR
incl. 19% tax excl. Shipping costs
Cut 4 valve seats Super Finish
Cut 4 valve seats Super Finish
Cut 4 valve seats with radius, Super Finish
99,00 EUR
incl. 19% tax excl. Shipping costs
Replace and cut 4 valve seats
Replace and cut 4 valve seats
Replace and cut 4 valve seats
Preis in Verbindung mit Std. Überholung!!!!
200,00 EUR
incl. 19% tax excl. Shipping costs
Repair 1 plug thread with helicoil
Repair 1 plug thread with helicoil
Repair 1 plug thread with helicoil
22,73 EUR
incl. 19% tax excl. Shipping costs
Alignbore of mainbearings waterboxer case
Alignbore of mainbearings waterboxer case
Alignbore of mainbearings
400,00 EUR
incl. 19% tax excl. Shipping costs
Cylinder hone, fresh up (4 cylinders)
Cylinder hone, fresh up (4 cylinders)
Cylinder hone, fresh up (4 cylinders)
120,00 EUR
incl. 19% tax excl. Shipping costs
Pull of crank gear
Pull of crank gear
Pull of crank gear
17,50 EUR
incl. 19% tax excl. Shipping costs
Regrind crank all journals
Regrind crank all journals
Regrind crank all journals
580,00 EUR
incl. 19% tax excl. Shipping costs
Regrind crank flange
Regrind crank flange
Regrind crank flange
55,09 EUR
incl. 19% tax excl. Shipping costs
Turn flywheel flange
Turn flywheel flange
Turn flywheel flange
39,62 EUR
incl. 19% tax excl. Shipping costs
Grind flywheel friction surface and pressure plate fitting surface
Grind flywheel friction surface and pressure plate fitting surface
Grind flywheel friction surface and pressure plate fitting surface.
Turning before might be needed (add extra cost).
70,00 EUR
incl. 19% tax excl. Shipping costs
Balancing crank
Balancing crank
Balancing crank
96,00 EUR
incl. 19% tax excl. Shipping costs
Balancing flywheel
Balancing flywheel
Balancing flywheel
110,00 EUR
incl. 19% tax excl. Shipping costs
Balancing flyweel and preasure plate
Balancing flyweel and preasure plate
Balancing flyweel and preasure plate
160,00 EUR
incl. 19% tax excl. Shipping costs
Balancing crank and flywheel
Balancing crank and flywheel
Balancing crank and flywheel
210,00 EUR
incl. 19% tax excl. Shipping costs
Balacing crank, flywheel and pressure plate
Balacing crank, flywheel and pressure plate
Balacing crank, flywheel and pressure plate
260,00 EUR
incl. 19% tax excl. Shipping costs
Balancing crank, flywheel, pressure plate and pulley
Balancing crank, flywheel, pressure plate and pulley
Balancing crank, flywheel, pressure plate and pulley
300,00 EUR
incl. 19% tax excl. Shipping costs
Rebuild rods Wasserboxer
Rebuild rods Wasserboxer
Rebuild rods
Price on request
Lighten, weight correction and shotblasting of rods WBX, set for one engine.
Lighten, weight correction and shotblasting of rods WBX, set for one engine.
Lighten, weight correction and shotblasting of rods, set for one engine.
Machining of your rods!
Lighten round 70 gramms for each!
495,00 EUR
incl. 19% tax excl. Shipping costs
Cleaning of parts in hot tank to machining
Cleaning of parts in hot tank to machining
Cleaning of parts in hot tank to machining
50,00 EUR
incl. 19% tax excl. Shipping costs
Sand blasting of parts
Sand blasting of parts
Sand blasting of parts
Keine Motorgehäuse!!!!
40,00 EUR
incl. 19% tax excl. Shipping costs
1 to 28 (from a total of 28)