13-09-2019

Machining

Machining
Machine VW type 4 heads for Porsche 914 manifolds
Machine VW type 4 heads for Porsche 914 manifolds.
So you can use your Porsche 914 manifolds with new VW type 4 cylinderheads from us.
80,00 EUR
 
incl. 19% tax excl. Shipping costs
Fly cut heads for more compression or larger cylinders CNC machining
Fly cut heads for more compression or larger cylinders CNC machining (2 cylinder heads)
120,00 EUR
 
incl. 19% tax excl. Shipping costs
Milling of cooling wing for cylinder claerance
Milling of cooling wing for cylinder claerance (2 cylinder heads)
58,00 EUR
 
incl. 19% tax excl. Shipping costs
Heads messure combustion camber and correction to desired ratio
Messure combustion on one camber and correction to desired ratio
50,00 EUR
 
incl. 19% tax excl. Shipping costs
Machining Type 4 cylinder heads for bigger pistons (103mm)
Machining Type 4 cylinder heads for bigger cylinder (2 cylinder heads), like Mahle Style 112mm.
Other sizes at add. costs.
51,65 EUR
 
incl. 19% tax excl. Shipping costs
Machining heads for dual springs
Machining heads for B.A.S. dual springs (2 cylinder heads).
Use only for camshafts above more than 324 degrees!
42,71 EUR
 
incl. 19% tax excl. Shipping costs
Replace 4 valve guides inlet or exhaust
Replace 4 valve guides inlet or exhaust (2 cylinder heads).
Oversize for additional costs.
95,00 EUR
 
incl. 19% tax excl. Shipping costs
Replace 4 valve guides exhaust Porsche 914
Replace 4 valve guides exhaust Porsche 914 (2 cylinder heads).
Oversize for additional costs.
140,00 EUR
 
incl. 19% tax excl. Shipping costs
Fit tapered race inlet guides
Fit tapered race inlet guides (2 clinder heads).
Oversize for additional costs.
120,00 EUR
 
incl. 19% tax excl. Shipping costs
Replace and produce 1 valve guide inlet or exhaust
Replace and produce 1 valve guide if needed, inlet or exhaust.
Price for one piece!
34,47 EUR
 
incl. 19% tax excl. Shipping costs
Grind 4 valves
Grind 4 valves 45° sealing surface
20,00 EUR
 
incl. 19% tax excl. Shipping costs
Grind 4 valve tips
6,20 EUR
 
incl. 19% tax excl. Shipping costs
Test 8 valve springs
20,00 EUR
 
incl. 19% tax excl. Shipping costs
Cut 4 valve seats Super Finish
Cut 4 valve seats with radius, Super Finish
70,00 EUR
 
incl. 19% tax excl. Shipping costs
Make pushrod tubes to lenght
Make supplied pushrod tubes to lenght (for one engine)
59,40 EUR
 
incl. 19% tax excl. Shipping costs
Replace and cut 4 valve seats
145,00 EUR
 
incl. 19% tax excl. Shipping costs
Repair 1 plug thread with helicoil
Repair 1 plug thread with helicoil
22,73 EUR
 
incl. 19% tax excl. Shipping costs
Cam Follower Bushings Type 4 including machining
Cam Follower Bushings Type 4, for use with machined cases, set for one engine.
Including case machining.

Achtung:

Spiel zwischen Stößel und Nockenwellenaxiallager bei Montage prüfen!

Es müssen immer von uns gelieferte Stößel verwendet werden, da diese von uns angepasst werden

225,00 EUR
 
incl. 19% tax excl. Shipping costs
Engine case resurfacing cylinder spigots CNC machining
Engine case resurfacing cylinder spigots CNC machining
70,00 EUR
 
incl. 19% tax excl. Shipping costs
Install shuffle bushing on center bearing saddle Type 4 Porsche 914
90,00 EUR
 
incl. 19% tax excl. Shipping costs
Alignbore of mainbearings VW Type 4 / Porsche 914 including checking case
Alignbore of mainbearings to oversize max. +1,00
We also check for free the dimensions of the camfollower holes and the center of the crankshaft to the camshaft.
This a special service from us to make sure, that you can use your case without any problems.
100,00 EUR
 
incl. 19% tax excl. Shipping costs
Modification of Type 4 case for Porsche Style Cooling
Modification of Type 4 case for Porsche Style Cooling
160,00 EUR
 
incl. 19% tax excl. Shipping costs
Pull of crank gear off
17,50 EUR
 
incl. 19% tax excl. Shipping costs
Regrind crank all journals
340,00 EUR
 
incl. 19% tax excl. Shipping costs
Regrind crank flange
55,09 EUR
 
incl. 19% tax excl. Shipping costs
Turn flywheel flange
39,62 EUR
 
incl. 19% tax excl. Shipping costs
Grind flywheel friction surface and pressure plate fitting surface
Grind flywheel friction surface and pressure plate fitting surface.
Turning before might be needed (add extra cost).
70,00 EUR
 
incl. 19% tax excl. Shipping costs
Machining Type 4 Flywheel for B.A.S. Special Bolts No. 23070
Machining Type 4 flywheel for B.A.S. special bolts, part number 23070
15,21 EUR
 
incl. 19% tax excl. Shipping costs
Machining Type 4 Flywheel for Needle Bearing
Machining Type 4 flywheel for needle bearing
24,12 EUR
 
incl. 19% tax excl. Shipping costs
Balancing crank
96,00 EUR
 
incl. 19% tax excl. Shipping costs
Balancing flywheel
87,00 EUR
 
incl. 19% tax excl. Shipping costs
Balancing flyweel and preasure plate
Balancing flyweel and preasure plate
110,00 EUR
 
incl. 19% tax excl. Shipping costs
Balancing crank and flywheel
155,00 EUR
 
incl. 19% tax excl. Shipping costs
Balacing crank, flywheel and pressure plate
Balacing crank, flywheel and pressure plate
198,00 EUR
 
incl. 19% tax excl. Shipping costs
Balancing crank, flywheel, pressure plate and pulley
Balancing crank, flywheel, pressure plate and pulley
220,00 EUR
 
incl. 19% tax excl. Shipping costs
Rebuild rods
230,00 EUR
 
incl. 19% tax excl. Shipping costs
Rebuild rods VW Type 4 for 22mm
380,00 EUR
 
incl. 19% tax excl. Shipping costs
Cleaning of parts in hot tank
50,00 EUR
 
incl. 19% tax excl. Shipping costs
Sand blasting of parts
Sand blasting of parts
Keine Motorgehäuse!!!!
40,00 EUR
 
incl. 19% tax excl. Shipping costs
Show 1 to 45 (from a total of 45 products)