VW BUS FESTIVAL 2023

Machining

Machining
Cut 6 valve seats Super Finish Porsche 911
Cut 6 valve seats Super Finish Porsche 911

Art.-Nr.: 80014P
Cut 6 valve seats Super Finish Porsche 911 with radius, Super Finish
220,00 EUR
 
incl. 19% tax excl. Shipping costs
Cylinder Head Rebuild Porsche 911 w/o milling cylinder sealing surface, set
Cylinder Head Rebuild Porsche 911 w/o milling cylinder sealing surface, set

Art.-Nr.: 80307P
Cylinder Head Rebuild Porsche 911.
New valve guides, valves seats radius cut, valves grind, without milling cylinder sealing surface.
Price for one set = 6 cylinderheads.
Attention:
All parts must deliver disassembled and cleaned.
Otherwise we can not machine your parts or only for additional cost.
Please do not remove the bolds!!!
 
980,00 EUR
 
incl. 19% tax excl. Shipping costs
Cylinder Head Rebuild Porsche 911, Satz
Cylinder Head Rebuild Porsche 911, Satz

Art.-Nr.: 80306P
new valve guides, valves seats radius cut, cylinder sealing surface milled, valves grind, price for all heads, set for one engine = 6 cylinderheads.
Attention:
All parts must deliver disassembled and cleaned.
Otherwise we can not machine your parts or only for additional cost.
Achtung:
Die Stehbolzen der Zylinderköpfe nicht entfernen!
1.180,00 EUR
 
incl. 19% tax excl. Shipping costs
Clean 6 cylinderheads porsche 911 for machining
Clean 6 cylinderheads porsche 911 for machining

Art.-Nr.: 81020P
Clean 6 cylinderheads porsche 911 for machining.
This is sometimes possible, that we can work on your heads.
Please do averytime also make them clean much god as possible, if you send them to us.
Cleaning and blasting of six heads porsche 911.
Like to see on the pictures, this is much work, but needet for machining sometimes.
280,00 EUR
 
incl. 19% tax excl. Shipping costs
Regrind top surface Porsche 911 cylinderheads, set
Regrind top surface Porsche 911 cylinderheads, set

Art.-Nr.: 80095P
In order to resurface the cylinder sealing surface of the Porsche 911 cylinder heads the opposide surface must be 100% flat to klamp the head to the milling machine.
Through the long service time most porsche 911 cylinderheads are bend and the rocker cover side must be grind.
Before this machining the studs and valve guides must be removed and the location dowels must drilled out.
Price for one set = 6 cylinder heads.
140,00 EUR
 
incl. 19% tax excl. Shipping costs
Replace 6 Valve Seats Porsche 911
Replace 6 Valve Seats Porsche 911

Art.-Nr.: 80102P
Replace 6 valve seats Porsche 911
Price only in combination with standard rebuild!
380,00 EUR
 
incl. 19% tax excl. Shipping costs
Cylinder Head Rebuild Porsche 911 and Tuning I, set
Cylinder Head Rebuild Porsche 911 and Tuning I, set

Art.-Nr.: 80356P
new valve guides, valves seats radius cut, cylinder sealing surface milled, valves grind include porting and valve polishing
Achtung:
Die Stehbolzen der Zylinderköpfe nicht entfernen!

 
1.780,00 EUR
 
incl. 19% tax excl. Shipping costs
Porsche 911 cylinder heads machine to bigger ports
Porsche 911 cylinder heads machine to bigger ports

Art.-Nr.: 80360P
Porsche 911 cylinder heads machine to bigger ports, machining all 6 heads, intake and exhaust side.
Also to add with our other cylinder head machining.
540,00 EUR
 
incl. 19% tax excl. Shipping costs
Cylinder Head Rebuild Porsche 911 Tuning II 50/43mm, Satz
Cylinder Head Rebuild Porsche 911 Tuning II 50/43mm, Satz

Art.-Nr.: 80384P
Cylinder Head Rebuild Porsche 911 Tuning II 50/43mm
New valve guides, new valves seats, cylinder sealing surface milled, porting and machine for larger valves inlet 50mm/ exhaust 43mm with 8mm stems, price for all heads.
Valves for must bought extra!

































 
2.700,00 EUR
 
incl. 19% tax excl. Shipping costs
Cylinder Head Rebuild Porsche 911 Tuning II 52/44mm, set
Cylinder Head Rebuild Porsche 911 Tuning II 52/44mm, set

Art.-Nr.: 80385P
Cylinder Head Rebuild Porsche 911 Tuning II 52/44mm
New valve guides, new valves seats, cylinder sealing surface milled, porting and machine for larger valves inlet 52mm/ exhaust 44mm with 8mm stems, price for all heads.
New valves for add. cost.































2.700,00 EUR
 
incl. 19% tax excl. Shipping costs
Cylinder Head Rebuild Porsche 911 Tuning II, Satz
Cylinder Head Rebuild Porsche 911 Tuning II, Satz

Art.-Nr.: 80386P
Cylinder Head Rebuild Porsche 911 Tuning II
New valve guides, new valves seats, cylinder sealing surface milled, porting, price for all heads.
New valves for add. price.

































 
2.700,00 EUR
 
incl. 19% tax excl. Shipping costs
Replace and produce 1 valve guide inlet or exhaust Porsche 911
Replace and produce 1 valve guide inlet or exhaust Porsche 911

Art.-Nr.: 80088P
Replace and produce 1 valve guide if needed, inlet or exhaust.
Price for one piece!
34,47 EUR
 
incl. 19% tax excl. Shipping costs
Oversize valve seat Porsche 911 head one p/c - add. cost
Oversize valve seat Porsche 911 head one p/c - add. cost

Art.-Nr.: 80089P
Oversize valve seat Porsche 911 head for one p/c - add. cost, price only in combination with standard head rebuild!
50,00 EUR
 
incl. 19% tax excl. Shipping costs
Alignbore of engine case Posche 911 for oversize bearings
Alignbore of engine case Posche 911 for oversize bearings

Art.-Nr.: 80294P
alignbore of engine case Posche 911 for oversize bearings
430,00 EUR
 
incl. 19% tax excl. Shipping costs
Resurfacing case parting surface and alignbore back to standard size Porsche 911
Resurfacing case parting surface and alignbore back to standard size Porsche 911

Art.-Nr.: 80292P
resurfacing case parting surface and alignbore back to standard size if possible
1.200,00 EUR
 
incl. 19% tax excl. Shipping costs
Resurfacing Cylinder Spigots Porsche 911
Resurfacing Cylinder Spigots Porsche 911

Art.-Nr.: 80201P
resurfacing Cylinder Spigots Porsche 911.
Check if cylinders will good fit at the case!
300,00 EUR
 
incl. 19% tax excl. Shipping costs
Machine Porsche 911 case for bigger cylinders
Machine Porsche 911 case for bigger cylinders

Art.-Nr.: 80013P
Machine Porsche 911 case for bigger cylinders, price for machining with new piston and cylinders from us, other diameters different price.
With some of the piston/cylinder for other engine versions you must machine you case for more stroke!
440,00 EUR
 
incl. 19% tax excl. Shipping costs
Milling bypass to use bigger oil pump Porsche 911 1966 to 1976 cases
Milling bypass to use bigger oil pump Porsche 911 1966 to 1976 cases

Art.-Nr.: 80167P
Milling bypass to use bigger oil pump Porsche 911
Case bypass modification to use the larger oil pump from 1976 on.
Including parts.

250,00 EUR
 
incl. 19% tax excl. Shipping costs
Change 911 cases for new intermediate shaft (machining)

Art.-Nr.: 80260P
Change 911 cases for new intermediate shaft (machining).
Without bearings and shaft, please order seperate!
590,00 EUR
 
incl. 19% tax excl. Shipping costs
Hot Tank Part Cleaning Porsche 911
Hot Tank Part Cleaning Porsche 911

Art.-Nr.: 81010P
hot Tank Part Cleaning Porsche 911
50,00 EUR
 
incl. 19% tax excl. Shipping costs
Sand Blasting
Sand Blasting

Art.-Nr.: 81011P
sand blasting
40,00 EUR
 
incl. 19% tax excl. Shipping costs
Resurfacing Cylinder Heads Porsche 911
Resurfacing Cylinder Heads Porsche 911

Art.-Nr.: 80098P
resurfacing cylinder heads Porsche 911, all 6 heads
198,00 EUR
 
incl. 19% tax excl. Shipping costs
Drilling of Twin Plugs Porsche 911
Drilling of Twin Plugs Porsche 911

Art.-Nr.: 80129P
drilling of twin plugs Porsche 911, all 6 heads
M12
Achtung:
Bearbeitungtechinsch kann es durch das alter Ihrer Zylinderköpfe möglich sein, das beim Zusatzgewinde Kühlrippen abbrechen.
Diese Verantwortung liegt bei Ihnen!
960,00 EUR
 
incl. 19% tax excl. Shipping costs
Cut 6 valve seats Super Finish Porsche 911
Cut 6 valve seats Super Finish Porsche 911

Art.-Nr.: 80009P
Cut 6 valve seats with radius Porsche 911, Super Finish
130,00 EUR
 
incl. 19% tax excl. Shipping costs
Replace 6 valve guides inlet or exhaust Porsche 911
Replace 6 valve guides inlet or exhaust Porsche 911

Art.-Nr.: 80099P
Replace 6 valve guides inlet or exhaust Porsche 911 (6 cylinder heads).
Oversize for additional costs.
180,00 EUR
 
incl. 19% tax excl. Shipping costs
Repair of exhaust stud Porsche 911
Repair of exhaust stud Porsche 911

Art.-Nr.: 80209P
Repair of exhaust stud Porsche 911with helicoil
one P/C
50,00 EUR
 
incl. 19% tax excl. Shipping costs
Replace rocker bushings Porsche 911
Replace rocker bushings Porsche 911

Art.-Nr.: 80132P
Replace rocker bushings Porsche 911, for one engine
440,00 EUR
 
incl. 19% tax excl. Shipping costs
Bore and hone cylinders Porsche 911
Bore and hone cylinders Porsche 911

Art.-Nr.: 80138P
Bore and hone cylinders Porsche 911, only cast iron cylinders
936,00 EUR
 
incl. 19% tax excl. Shipping costs
Hone Cylinders Porsche 911, Fresh Up
Hone Cylinders Porsche 911, Fresh Up

Art.-Nr.: 80109P
hone cylinders Porsche 911, fresh up, all 6
240,00 EUR
 
incl. 19% tax excl. Shipping costs
Check crankshaft for demension run out and cracks Porsche 911
Check crankshaft for demension run out and cracks Porsche 911

Art.-Nr.: 80126P
Check crankshaft for demension run out and cracks Porsche 911
95,00 EUR
 
incl. 19% tax excl. Shipping costs
Pull Off Crankshaft Gear Porsche 911
Pull Off Crankshaft Gear Porsche 911

Art.-Nr.: 80060P
Pull off crankshaft gear Porsche 911
17,50 EUR
 
incl. 19% tax excl. Shipping costs
Crankshaft Regrind Porsche 911
Crankshaft Regrind Porsche 911

Art.-Nr.: 80106P
Crankshaft Regrind Porsche 911
800,00 EUR
 
incl. 19% tax excl. Shipping costs
Polishing of used Crank Journals Porsche 911
Polishing of used Crank Journals Porsche 911

Art.-Nr.: 80163P
polishing of used Crank Journals Porsche 911
120,00 EUR
 
incl. 19% tax excl. Shipping costs
Flywheel Leighten and Balancing Porsche 911
Flywheel Leighten and Balancing Porsche 911

Art.-Nr.: 80116P
flywheel leighten and balancing Porsche 911
247,40 EUR
 
incl. 19% tax excl. Shipping costs
Grinding of Friction Surface Porsche 911 Flywheel
Grinding of Friction Surface Porsche 911 Flywheel

Art.-Nr.: 80082P
grinding of friction surface Porsche 911 flywheel
85,00 EUR
 
incl. 19% tax excl. Shipping costs
Turning Flywheel Porsche 911
Turning Flywheel Porsche 911

Art.-Nr.: 80083P
turning flywheel before grinding Porsche 911, if needed
38,50 EUR
 
incl. 19% tax excl. Shipping costs
Resurface flywheel flange Porsche 911
Resurface flywheel flange Porsche 911

Art.-Nr.: 80094P
Resurface flywheel flange Porsche 911
39,62 EUR
 
incl. 19% tax excl. Shipping costs
Balancing Crankshaft Porsche 911
Balancing Crankshaft Porsche 911

Art.-Nr.: 80038P
balancing crankshaft Porsche 911
110,00 EUR
 
incl. 19% tax excl. Shipping costs
Balancing Crankshaft and Flywheel Porsche 911
Balancing Crankshaft and Flywheel Porsche 911

Art.-Nr.: 80024P
balancing crankshaft and flywheel Porsche 911
210,00 EUR
 
incl. 19% tax excl. Shipping costs
Balancing Crankkshaft, Flywheel and Clutch Pressure Plate Porsche 911
Balancing Crankkshaft, Flywheel and Clutch Pressure Plate Porsche 911

Art.-Nr.: 80046P
balancing crankkshaft, flywheel and clutch pressure plate Porsche 911
260,00 EUR
 
incl. 19% tax excl. Shipping costs
Balance crankshaft, flywheel, clutch plate and pully
Balance crankshaft, flywheel, clutch plate and pully

Art.-Nr.: 80081P
balance crankshaft Porsche 911, flywheel, clutch plate and pully seperately and together.
300,00 EUR
 
incl. 19% tax excl. Shipping costs
Balancing Flywheel Porsche 911
Balancing Flywheel Porsche 911

Art.-Nr.: 80039P
balancing flywheel Porsche 911
120,00 EUR
 
incl. 19% tax excl. Shipping costs
Balancing Flywhell and Clutch Plate Porsche 911
Balancing Flywhell and Clutch Plate Porsche 911

Art.-Nr.: 80154P
balancing flywhell and clutch plate Porsche 911
160,00 EUR
 
incl. 19% tax excl. Shipping costs
Rod Rebuild Porsche 911 including new bolds and nuts
Rod Rebuild Porsche 911 including new bolds and nuts

Art.-Nr.: 80118P
Rod rebuild Porsche 911, resizing big end, fitting of new bushings, including new bolds and nuts
860,00 EUR
 
incl. 19% tax excl. Shipping costs
Rod bolts with nuts Porsche 911 2,0
Rod bolts with nuts Porsche 911 2,0

Art.-Nr.: 07201P
Rod bolts with nuts Porsche 911 2,0, for one engine
260,00 EUR
 
incl. 19% tax excl. Shipping costs
Rod bolts with nuts Porsche 911 2,2
Rod bolts with nuts Porsche 911 2,2

Art.-Nr.: 07202P
Rod bolts with nuts Porsche 911 2,2, for one engine
260,00 EUR
 
incl. 19% tax excl. Shipping costs
Rod bolts with nuts Porsche 911 2,4-3,0
Rod bolts with nuts Porsche 911 2,4-3,0

Art.-Nr.: 07203P
Rod bolts with nuts Porsche 911 2,4-3,0, for one engine
280,00 EUR
 
incl. 19% tax excl. Shipping costs
Rod bolts with nuts Porsche 911 3,2-3,6
Rod bolts with nuts Porsche 911 3,2-3,6

Art.-Nr.: 07204P
Rod bolts with nuts Porsche 911 3,2-3,6, for one engine
280,00 EUR
 
incl. 19% tax excl. Shipping costs
Porsche 911 lighten, weight correction and shotblasting of rods
Porsche 911 lighten, weight correction and shotblasting of rods

Art.-Nr.: 80127P
Porsche 911 lighten, weight correction and shotblasting of rods, set for one engine.
Machining of your rods!
Lighten round 70 gramms for each!
698,00 EUR
 
incl. 19% tax excl. Shipping costs
Show 1 to 49 (from a total of 49 products)