Bearing Sets

Bearing Sets
If you are searching a other set for Porsche 911, 964, 993, 996, 997, Boxster or other ones, just ask for it.
For other diameter please ask about!
Only mainbearings 1-7, because bearing 8 at the most times must not be changed!
If you also need it, please ask for it.
Oversize mainbearing Porsche 911 2,0-2,7 to 1974 by Ahnendorp +0,50 -0,25
Oversize mainbearing Porsche 911 2,0-2,7 to 1974 by Ahnendorp +0,50 -0,25

Art.-Nr.: 05300P
Oversize mainbearing Porsche 911 2,0-2,7 to 1974, new produced as Ahnendorp part.
So many old cases could be use again.
Oversize for the case / mainbearing: +0,50mm
Undersize for the crankshaft: -0,25mm
Delivery: Bearings 1-7.
690,00 EUR
 
incl. 19% tax
Mainbearing Porsche 911 2,0-2,7 to 1974 Standard
Mainbearing Porsche 911 2,0-2,7 to 1974 Standard

Art.-Nr.: 05224P
mainbearing Porsche 911 2,0-2,7 to 1974 standard, for one engine
230,00 EUR
 
incl. 19% tax excl. Shipping costs
Mainbearing Porsche 911 2,0-2,7 to 1974 -0,25
Mainbearing Porsche 911 2,0-2,7 to 1974 -0,25

Art.-Nr.: 05226P
mainbearing Porsche 911 2,0-2,7 to 1974 -0,25, for one engine
298,00 EUR
 
incl. 19% tax excl. Shipping costs
Mainbearing Porsche 911 2,7-3,0 up to 1974 Standard
Mainbearing Porsche 911 2,7-3,0 up to 1974 Standard

Art.-Nr.: 05223P
mainbearing Porsche 911 2,7-3,0 standard, for one engine
145,00 EUR
 
incl. 19% tax
Mainbearing Porsche 911 3,0-3,6 1978-1989 Standard
Mainbearing Porsche 911 3,0-3,6 1978-1989 Standard

Art.-Nr.: 05225P
mainbearing Porsche 911 3,0-3,6 1978-1989 Standard, for one engine
165,00 EUR
 
incl. 19% tax excl. Shipping costs
Mainbearing No. 8 Porsche 911 Standard
Mainbearing No. 8 Porsche 911 Standard

Art.-Nr.: 05330P
Mainbearing No. 8 Porsche 911 Standard
220,00 EUR
 
incl. 19% tax excl. Shipping costs
Mainbearing No. 8 Porsche 911 Standard / -0,25
Mainbearing No. 8 Porsche 911 Standard / -0,25

Art.-Nr.: 05331P
Mainbearing No. 8 Porsche 911 Standard / -0,25
198,00 EUR
 
incl. 19% tax excl. Shipping costs
Rod Bearing Porsche 911 2,0-2,2 Standard
Rod Bearing Porsche 911 2,0-2,2 Standard

Art.-Nr.: 06063P
rod bearing set Porsche 911 2,0-2,2 standard, for one engine
120,00 EUR
 
incl. 19% tax excl. Shipping costs
Rod Bearing Porsche 911 2,0-2,2 -0,25
Rod Bearing Porsche 911 2,0-2,2 -0,25

Art.-Nr.: 06066P
rod bearing set Porsche 911 2,0-2,2 -0,25, for one engine
190,00 EUR
 
incl. 19% tax excl. Shipping costs
HD - Race Rod Bearing Set Porsche 911 2,0-2,2 Standard
HD - Race Rod Bearing Set Porsche 911 2,0-2,2 Standard

Art.-Nr.: 06200P
HD - Race Rod bearing set for Porsche 911 2,0-2,2 Standard, 57mm.
230,00 EUR
 
incl. 19% tax excl. Shipping costs
HD - Race Rod Bearing Set Porsche 911 2,0-2,2 -0,25mm
HD - Race Rod Bearing Set Porsche 911 2,0-2,2 -0,25mm

Art.-Nr.: 06201P
HD - Race Rod bearing set for Porsche 911 2,0-2,2 -0,25mm, 57mm rod diameter.
230,00 EUR
 
incl. 19% tax excl. Shipping costs
Rod Bearing Porsche 911 2,4-3,0 until 1977 Standard
Rod Bearing Porsche 911 2,4-3,0 until 1977 Standard

Art.-Nr.: 06062P
rod bearing Porsche 911 2,4-3,0 until 1977 standard, for one engine
170,00 EUR
 
incl. 19% tax
Rod Bearing Porsche 911 2,4-3,0 until 1977 -0,25
Rod Bearing Porsche 911 2,4-3,0 until 1977 -0,25

Art.-Nr.: 06067P
rod bearing Porsche 911 2,4-3,0 until 1977 -0,25, for one engine
Price on request
 
Rod Bearing Porsche 911 3,0 upper 1977 Standard
Rod Bearing Porsche 911 3,0 upper 1977 Standard

Art.-Nr.: 06064P
rod bearing Porsche 911 3,0 upper 1977 standard, for one engine
148,00 EUR
 
incl. 19% tax
Rod Bearing Porsche 911 3,2-3,6 1984-1993 Standard
Rod Bearing Porsche 911 3,2-3,6 1984-1993 Standard

Art.-Nr.: 06065P
rod bearing Porsche 911 3,2-3,6 1984-1993 standard, for one engine
148,00 EUR
 
incl. 19% tax excl. Shipping costs
Show 1 to 15 (from a total of 15 products)