Engine Gasket Set VW Beetle 1,3-1,6 REINZ german quality
Engine Gasket Set VW Beetle 1,3-1,6 REINZ german quality

Engine Gasket Set VW Beetle 1,3-1,6 REINZ german quality

Product No.:
10010R
35,00 EUR

incl. 19% tax excl. Shipping costs

This product is similar to:

Customers who bought this product bought also the following products:

Rocker Set VW type 1 engine with shims forged serial ratio complete
Rocker Set VW type 1 engine with shims forged, serial ratio complete set.
Those ones are the only ones which are sold complete in this high quality!
460,00 EUR
Assembly paste for bearings, crank and cam
Assembly paste for bearings, crank and cam
22,00 EUR
Tailpipe for VW Beetle Standard Exhaust
Tailpipe for VW Beetle Standard Exhaust, price for one piece
12,00 EUR
Mounting Set for VW Beetle Standard Tail Pipe
Mounting Set for VW Beetle Standard Tail Pipe, for one piece
8,00 EUR
Flywheel Instalation Kit VW Type 1 Engine For Beetle, Van and all other
Flywheel Instalation Kit VW Type 1 Engine For Beetle, Van and all other engines up 30hp.
50,00 EUR
Pushrod Guide for mechanical fuel pump VW Beetle
Pushrod guide for mechanical fuel pump VW Beetle
14,80 EUR
Tappet for mechsnical fuel pump 108mm VW Type 1 engine
Tappet for mechsnical fuel pump 108mm VW Type 1 engine
18,00 EUR
Mechanical fuel pump VW type 1 engine - 108mm tappet
Mechanical fuel pump VW type 1 engine, for 108mm tappet
Sample picture
50,00 EUR
Piston and Cylinder Set 85,5mm VW Beetle Engine, 1585 ccm
Piston and cylinder set, complete set for one vw bettle engine.
Including piston rings, piston pins and piston circlips.

Bore (mm): 85,5
Stroke (mm): 69
Engine size (ccm): 1585

Indications:
- cast pistons
169,00 EUR
Mainbearing +1,00 / -0,25 Axial 20/21
Mainbearing for VW Beetle engine, set for one engine
case: +1,00
crank: -0,25
axial: 20 or 21 mm (ask for availabiltity)

Please notice:
Sample pictures - the bearings can be from different brands!
We only deliver quality bearings which are also used for our complete engines.
It is not possible with the order to select a special brand!
58,00 EUR
Getriebeabschlussblech VW Typ 1 Motor mit Aussparung für Ölkühler, Käfer Bus usw.
Getriebeabschlussblech VW Typ 1 Motor mit Aussparung für Ölkühler, Käfer Bus usw.
Hinweis: Bei VW Bussen T1 und T2a passend, alle späteren Busse benötigen ein anderes Blech.
45,00 EUR
Luftleitbleche unterhalb der Zylinder VW Typ 1 Motor M8, Satz
Luftleitbleche unterhalb der Zylinder VW Typ 1 Motor für neue Zylinderstehbolzen M8.
Dürfen auf keinen Fall vergessen werden, falls sie beim Motorbau vergessen wurden, darf wieder zerlegt werden, deshalb auch umgangssprachlich als "Idiotenbleche" bekannt.
Werden je nach Verfügbarkeit in schwarz oder gelb-verzinkt geliefert, aus logistischen Gründen ist leider keine Auswahl möglich.
Lieferung als Set für einen Motor = 2 Stück
6,00 EUR
Woodruff key for crankschaft, big
Woodruff key crankschaft, big
4,80 EUR
Mainbearing +0,50 / -0,25
Mainbearing for VW Beetle engine, set for one engine
case: +0,50
crank: -0,25

Please notice:
Sample pictures - the bearings can be from different brands!
We only deliver quality bearings which are also used for our complete engines.
It is not possible with the order to select a special brand!
55,00 EUR
Valve Cover Gasket Set REINZ OE VW Type 4 / Porsche 914
Valve Cover Gasket Set REINZ OE VW Type 4 / Porsche 914 (10 gaskets)
28,00 EUR
Mainbearing +1,00 / -0,25
Mainbearing for VW Beetle engine, set for one engine
case: +1,00
crank: -0,25

Please notice:
Sample pictures - the bearings can be from different brands!
We only deliver quality bearings which are also used for our complete engines.
It is not possible with the order to select a special brand!
65,00 EUR
Rod Bearing Set VW Beetle Engine -0,25
Rod bearing set VW Beetle engine, -0,25mm, set for one engine

Please notice:
Sample pictures - the bearings can be from different brands!
We only deliver quality bearings which are also used for our complete engines.
It is not possible with the order to select a special brand!
19,00 EUR
Camshaft Bearing Set VW Beetle Engine Standard
Camshaft bearing set VW Beetle engine standard, for one engine.
For camshaft bearing with double thrust cam bearing use Nr. 05147!

Please notice:
Sample pictures - the bearings can be from different brands!
We only deliver quality bearings which are also used for our complete engines.
It is not possible with the order to select a special brand!
35,00 EUR
Flywheel Seal Type 4
Flywheel Seal Type 4
12,00 EUR