Main page » Beetle van type 1 » Exhaust

Exhaust

Exhaust

If you need a other system of our exhausts, please contact us.
Many systems are to get with ohter heading system too!

Ahnendorp VW Beetle Type 1 Customsport 30hp Exhaust

Ahnendorp VW Beetle Type 1 Customsport 30hp Exhaust

Ahnendorp VW Beetle Type 1 Customsport 30hp Exhaust - stainlees steel - serial optic.
Do not think this is a normal exhaust or something like all other do produce!
All other exhausts are tourque killers!

If you want to have a normal optic and do not want to use a header system like our Ahnendorp Streetsport you have to buy this!
This is the only alternativ which will not cost much tourque and hp!
We use same lenghts of the cylinders 2 and 4.
The noise is very dump, but not to loud!
For type 1 25 / 30hp basic engines and tuned ones up to 120hp maximum.
To use with header boxes.
Three versions of add. end pipes, please inform us by the order:
Version A
39mm outside
or
Version B
Barndoor / Brezel look (little bit more agressiv sound and a bit louder)
or
Version C
Sebring Style middle pipe

1.080,00 EUR

incl. 19% tax excl. Shipping costs

Sebring Style Tail Pipe stainless for Ahnendorp 30hp vw beetle customsport exhaust and serial 30hp exhaust

Sebring Style Tail Pipe stainless for Ahnendorp 30hp vw beetle customsport exhaust and serial 30hp exhaust

Sebring Style Tail Pipe stainless for Ahnendorp 30hp vw beetle customsport exhaust and serial 30hp exhaust.
To fit with our customsport 30hp exhaust and serial exhaust.
Tailpipe stainless, handmade with silencer insert.

280,00 EUR

incl. 19% tax excl. Shipping costs

Serial Style Tail Pipe Set stainless for Ahnendorp 30hp vw beetle customsport exhaust and serial 30hp exhaust

Serial Style Tail Pipe Set stainless for Ahnendorp 30hp vw beetle customsport exhaust and serial 30hp exhaust

Serial Style Tail Pipe stainless for Ahnendorp 30hp vw beetle customsport exhaust and serial 30hp exhaust
To fit with our customsport 30hp exhaust and serial exhaust.
Tailpipes stainless, handmade with silencer insert.
Set

220,00 EUR

incl. 19% tax excl. Shipping costs

Barn Door Style Tail Pipe stainless for Ahnendorp 30hp vw beetle customsport exhaust, also T1 van

Barn Door Style Tail Pipe stainless for Ahnendorp 30hp vw beetle customsport exhaust, also T1 van

Baarn Door Style Tail Pipe stainless for Ahnendorp 30hp vw beetle customsport exhaust, to use on early beetles and T1 vans.
To fit with our customsport 30hp exhaust.
Tailpipe stainless, handmade.

190,00 EUR

incl. 19% tax excl. Shipping costs

Upgrade Kit Type 1 Engine 39mm Single Carburetor with Manifold and Streetsport Exhaust

Upgrade Kit Type 1 Engine 39mm Single Carburetor with Manifold and Streetsport Exhaust

Upgrade Kit Type 1 Engine 39mm Single Carburetor with Manifold and Streetsport Exhaust.
With this upgrade kit for your type 1 doubleport engine (from 30hp and on) you get much more torque and hp without much inside hardware modifications.
To use with serial and also modified engines.
On a 1600cc engine you can get up to 30Nm more torque and up 10hp more.
Nice to ride also with serial engines, more hp and torque possible with modified engines possible!
This set includes:
- 39mm B.A.S. carburetor (new)
- maxflow manifold
- exhaust gaskets
- interconnects for the manifolds
- streetsport steel exhaust with stainless endtubes
To use for beetle, karmann-ghia, VW split window van t1 and 181 thing with modifications, bay window T2 van only with massiv modifications of the engine stand.

Price on request

Ahnendorp VW Beetle Type 1 Customsport Exhaust - stainlees steel - w/o tail pipes

Ahnendorp VW Beetle Type 1 Customsport Exhaust - stainlees steel - w/o tail pipes

Ahnendorp VW Beetle Type 1 Customsport Exhaust - stainlees steel - serial optic - inside 35mm, without tail pipes, please order seperate.
Here we want to show you the newest of our VW beetle type 1 exhaust.
Do not think this is a normal exhaust or something like all other do produce!
All other exhausts are tourque killers!
If you want to have a normal optic and do not want to use a header system like our Ahnendorp Streetsport you have to buy this!
This is the only alternativ which will not cost much tourque and hp!
We use same lenghts of the cylinders 2 and 4 - so see the results on the pictures by yourself.
The noise is very dump, but not to loud!
For type 1 engines up to 2,5 liter and 150hp maximum.
Also perfect for series up to 1300ccm.
Perfect to fit.
To use with header boxes.
Four add. versions of end pipes, please order seperate:
===
Version A
46mm outside
===
Version A
46mm outside silent version, maximum quiet
===
Version B
54mm outside (little bit more agressiv sound and a bit louder).
===
Version Sebring Style
Middle tail pipe
===
Fit also on small endplate!
Hier finden Sie ein Video, das den Klang deutlich macht (bitte gute Lautsprecher verwenden, damit die dumpfen Frequenzen übertragen werden!):
VIDEO AHNENDORP CUSTOMSPORT AUF YOUTUBE

1.100,00 EUR

incl. 19% tax excl. Shipping costs

Ahnendorp VW Beetle Type 1 Customsport Exhaust - stainlees steel - carb. heading - w/o tail pipes

Ahnendorp VW Beetle Type 1 Customsport Exhaust - stainlees steel - carb. heading - w/o tail pipes

Ahnendorp VW Beetle Type 1 Customsport Exhaust for single oe carb like solex 34 or tuning solex 37, 39 or 40 from us - stainlees steel - serial optic - inside 35m, without tail pipes, please order seperate.
Here we want to show you the newest of our VW beetle type 1 exhaust.
Do not think this is a normal exhaust or something like all other do produce!
All other exhausts are tourque killers!
If you want to have a normal optic and do not want to use a header system like our Ahnendorp Streetsport you have to buy this!
This is the only alternativ which will not cost much tourque and hp!
We use same lenghts of the cylinders 2 and 4 - so see the results on the pictures by yourself.
The noise is very dump, but not to loud!
For type 1 engines up to 2,5 liter and 150hp maximum.
Also perfect for series up to 1300ccm.
Perfect to fit.
To use with header boxes.
Four add. versions of end pipes, please order seperate:
===
Version A
46mm outside
===
Version A
46mm outside silent version, maximum quiet
===
Version B
54mm outside (little bit more agressiv sound and a bit louder).
===
Version Sebring Style
Middle tail pipe
===
Fit also on small endplate!
Hier finden Sie Videos mit unseren Auspuffanlagen:
https://www.facebook.com/ahnendorp/videos

1.140,00 EUR

incl. 19% tax excl. Shipping costs

Tail Pipe Customsport beetle small version (A)

Tail Pipe Customsport beetle small version (A)

Tail Pipe Customsport beetle small version (A) 46mm outside.
To fit an all of our customsport beetle exhausts with the new mounting system, stainless steel.
Set = 2 p/c

110,00 EUR

incl. 19% tax excl. Shipping costs

Tail Pipe Customsport beetle small SILENT version (A)

Tail Pipe Customsport beetle small SILENT version (A)

Tail Pipe Customsport beetle small SILENT version (A) 48mm outside.
This set will reduce the noice at maximum, also to use with bigger engine.
No lose of hp!
To fit an all of our customsport beetle exhausts with the new mounting system, stainless steel.
Set = 2 p/c

180,00 EUR

incl. 19% tax excl. Shipping costs

Tail Pipe Customsport beetle version (B)

Tail Pipe Customsport beetle version (B)

Tail Pipe Customsport beetle small version (B) 54mm outside.
To fit an all of our customsport beetle exhausts with the new mounting system, stainless steel.
Set = 2 p/c

140,00 EUR

incl. 19% tax excl. Shipping costs

Tail Pipe Customsport beetle version 63 mm (C)

Tail Pipe Customsport beetle version 63 mm (C)

Tail Pipe Customsport beetle small version (C) 63mm outside.
To fit an all of our customsport beetle exhausts with the new mounting system, stainless steel.
Set = 2 p/c

Price on request

Sebring style tailpipe for VW type 1 customsport 21113 / 21113c exhaust system (tailpipe only)

Sebring style tailpipe for VW type 1 customsport 21113 / 21113c exhaust system (tailpipe only)

Sebring style tailpipe for VW type 1 customsport 21113 / 21113c exhaust system (tailpipe only), stainless steel.
To use with our customsport type 1 exhaust from 2022 and newer, older ones must be modified from you.

RRP 280,00 EUR
Only 200,00 EUR

incl. 19% tax excl. Shipping costs

Ahnendorp VW T1 Van Bus Exhaust with same lenght stainless

Ahnendorp VW T1 Van Bus Exhaust with same lenght stainless

Ahnendorp VW T1 Van Bus Customsport Exhaust - stainlees steel - serial optic - inside 35mm.
Here we want to show you the newest of our VW T1 Van Bus type 1 exhaust.
Do not think this is a normal exhaust or something like all other do produce!
We checked all other exhaust which are to get at the moment and at the past - the best one we used for a example on our dyno.

If you want to have a normal optic and do not want to use a header system like our Ahnendorp Streetsport you have to buy this!
This is the only alternativ which will not cost much tourque and hp!
We use same lenghts of the cylinders 2 and 4 - so see the results on the pictures by yourself.
The noise is very dump, but not to loud!
For type 1 engines up to 2500ccm and 160hp maximum.
Also perfect for series engines!.
Perfect to fit.
To use with header boxes or j-tube (sold seperate).
Hier finden Sie Videos mit unseren Auspuffanlagen:
https://www.facebook.com/ahnendorp/videos

1.450,00 EUR

incl. 19% tax excl. Shipping costs

Ahnendorp VW T1 Van Bus Exhaust preheading stainless

Ahnendorp VW T1 Van Bus Exhaust preheading stainless

Ahnendorp VW T1 Van Bus Customsport Exhaust - stainlees steel - serial optic - inside 35mm.
Version for OE single carb. or our 37/39 solex tuning carb.
Here we want to show you the newest of our VW T1 Van Bus type 1 exhaust.
Do not think this is a normal exhaust or something like all other do produce!
We checked all other exhaust which are to get at the moment and at the past - the best one we used for a example on our dyno.

If you want to have a normal optic and do not want to use a header system like our Ahnendorp Streetsport you have to buy this!
This is the only alternativ which will not cost much tourque and hp!
We use same lenghts of the cylinders 2 and 4 - so see the results on the pictures by yourself.
The noise is very dump, but not to loud!
For type 1 engines up to 2500ccm and 130hp maximum.
Also perfect for series up to 1300ccm.
Perfect to fit.
To use with header boxes or j-tube (sold seperate).
Hier finden Sie Videos mit unseren Auspuffanlagen:
https://www.facebook.com/ahnendorp/videos

1.500,00 EUR

incl. 19% tax excl. Shipping costs

Ahnendorp VW T2 T2a T2a/b T2b Van Bus Customsport Exhaust without carb. heating

Ahnendorp VW T2 T2a T2a/b T2b Van Bus Customsport Exhaust without carb. heating

Ahnendorp VW T2 T2a T2a/b Van Bus Customsport Exhaust - stainlees steel - serial optic - inside 35mm.
Here we want to show you the newest of our VW T2 Van Bus type 1 exhaust.
Do not think this is a normal exhaust or something like all other do produce!
We checked all other exhaust which are to get at the moment and at the past - the best one we used for a example on our dyno.

If you want to have a normal optic and do not want to use a header system like our Ahnendorp Streetsport you have to buy this!
This is the only alternativ which will not cost much tourque and hp!
We use same lenghts of the cylinders 2 and 4 - so see the results on the pictures by yourself.
The noise is very dump, but not to loud!
For type 1 engines up to 2,5 liter and 150hp maximum.
Also perfect for series up to 1300ccm.
Perfect to fit.
To use with header boxes or j-tube (sold seperate).
Hier finden Sie Videos mit unseren Auspuffanlagen:
https://www.facebook.com/ahnendorp/videos

1.450,00 EUR

incl. 19% tax excl. Shipping costs

Ahnendorp VW T2 T2a T2a/b T2b Van Bus Customsport Exhaust with carb. heating

Ahnendorp VW T2 T2a T2a/b T2b Van Bus Customsport Exhaust with carb. heating

Ahnendorp VW T2 T2a T2a/b Van Bus Customsport Exhaust with carb. heating- stainlees steel - serial optic - inside 35mm.
Here we want to show you the newest of our VW T2 Van Bus type 1 exhaust.
Do not think this is a normal exhaust or something like all other do produce!
We checked all other exhaust which are to get at the moment and at the past - the best one we used for a example on our dyno.

If you want to have a normal optic and do not want to use a header system like our Ahnendorp Streetsport you have to buy this!
This is the only alternativ which will not cost much tourque and hp!
We use same lenghts of the cylinders 2 and 4 - so see the results on the pictures by yourself.
The noise is very dump, but not to loud!
For type 1 engines up to 2,5 liter and 150hp maximum.
Also perfect for series up to 1300ccm.
Perfect to fit.
To use with header boxes or j-tube (sold seperate).
Hier finden Sie Videos mit unseren Auspuffanlagen:
https://www.facebook.com/ahnendorp/videos

1.500,00 EUR

incl. 19% tax excl. Shipping costs

Mountingset for Ahnendorp Customsport beetle / bus exhaust

Mountingset for Ahnendorp Customsport beetle / bus exhaust

Mountingset for Ahnendorp Customsport beetle / bus exhaust 21113 without carb. heading.
Claps for the head exchanger not includet (diffent version to get by us seperate).

27,00 EUR

incl. 19% tax excl. Shipping costs

Mountingset for Ahnendorp Customsport beetle / bus exhaust with car. heading

Mountingset for Ahnendorp Customsport beetle / bus exhaust with car. heading

Mountingset for Ahnendorp Customsport beetle abd bus exhaust 21113C with carb. heading.
Claps for the head exchanger not includet (diffent version to get by us seperate).

34,95 EUR

incl. 19% tax excl. Shipping costs

Streetsport Exhaust VW Beetle Steel

Streetsport Exhaust VW Beetle Steel

Tube inside diameter 35-41mm, slips over the original heaterboxes, up to round 160HP.
Steel tubes and aluminum coated silencers.
Header can be fit on engine dimension.
Sound of our streetsport exhaust used in a split window VW T1:
https://fb.watch/fMpX3qZQbt/
Hinweis: die Stahlschalldämpfer haben herstellungsbedingt Beulen vom Pfalzen, diese sind unvermeidbar in der Herstellung!

Seit mehr als 40 Jahren produzieren wir unsere Streetsport Auspuffanlage für VW Käfer mit Typ 1 Motor.
Aus optischen Gründen sind die Endrohre aus Edelstahl. Damit ist die Anlage in Stahl nicht nur kostengünstig,
sondern unterscheidet sich kaum noch von der Edelstahlvariante.

Beim Kauf der Anlage können wir Ihnen dieses gerne bestätigen, da so auch eine Verwendung mit H-Kennzeichen erleichtert wird (siehe Foto).

Die Rohrdurchmesser der Anlage betragen innen betragen 35-41 mm.

Das Gewicht der Anlage wird durch spezielle Halterungen aufgefangen, wodurch keine Halterungen an den Schalldämpfern notwendig sind.

Dadurch können auch keine Risse oder ähnliche Beschwerden auftreten.

Die absolut gleiche Rohrlängen sind nach richtiger Zündfolge verlegt und münden in einem strömungsgünstig, messerscharf von Hand geschnittenen Kollektor, mit 2 widerstandsarmen Schalldämpfern.

Natürlich befinden sich die Endrohre in original Position, die original Wärmetauscher können verwendet werden, eine Filterölpumpe kann auch montiert werden.

Mit Wärmetauscher Ersatzrohren für Motoren bis 160 PS geeignet.

Diese Anlage ist nur ca. 2 cm tiefer als die Motorunterseite und läßt sich sogar mit Anhängerkupplung verwenden (siehe Foto).
Neu: Fächerkrümmer ab jetzt schiebbar wie bereits bei unserer Edelstahl Version, damit Sie die den Krümmer von der Breite an Ihren Motor perfekt anpassen können!
Die Stahlschalldämpfer haben herstellungsbedingt Beulen vom Pfalzen, diese sind unvermeidbar in der Herstellung!
Hinweis: Wir empfehlen die optionale Befestigung und Ausrichtung der Endrohre mit jeweils 2 Rohrschellen, welche Sie miteinander verbinden.
Soundcheck Ahnendorp B.A.S. Streetsport Auspuff mit Doppelvergaser:
Ahnendorp Streetsport Auspuff Video mit Doppelvergaser

550,00 EUR

incl. 19% tax excl. Shipping costs

Streetsport Exhaust VW Beetle Steel with Carburettor preheating

Streetsport Exhaust VW Beetle Steel with Carburettor preheating

Streetsport Exhaust VW Beetle and van steel with Carburettor preheating.
Tube inside diameter 35-41mm, slips over the original heaterboxes, up to round 160HP.
Steel tubes and aluminum coated silencers.
Header can be fit on engine dimension.
Soundcheck Streetsport Auspuff im T1 Bus:
https://fb.watch/fMpX3qZQbt/
Die Stahlschalldämpfer haben herstellungsbedingt Beulen vom Pfalzen, diese sind unvermeidbar in der Herstellung!

590,00 EUR

incl. 19% tax excl. Shipping costs

Streetsport Exhaust VW Beetle Stainless Steel VW Beetle Type 1

Streetsport Exhaust VW Beetle Stainless Steel VW Beetle Type 1

Tube inside diameter 35-41mm, slips over the original heaterboxes, up to round 160HP.
Stainless steel including handmade silencers.

Seit mehr als 40 Jahren produzieren wir unsere Streetsport Auspuffanlage für VW Käfer mit Typ 1 Motor.

Beim Kauf der Anlage können wir Ihnen dieses gerne bestätigen, da so auch eine Verwendung mit H-Kennzeichen erleichtert wird (siehe Foto).

Die Rohrdurchmesser der Anlage betragen innen betragen 35-41 mm.

Das Gewicht der Anlage wird durch spezielle Halterungen aufgefangen, wodurch keine Halterungen an den Schalldämpfern notwendig sind.

Dadurch können auch keine Risse oder ähnliche Beschwerden auftreten.

Die absolut gleiche Rohrlängen sind nach richtiger Zündfolge verlegt und münden in einem strömungsgünstig, messerscharf von Hand geschnittenen Kollektor,

mit 2 widerstandsarmen Schalldämpfern.

Natürlich befinden sich die Endrohre in original Position, die original Wärmetauscher können verwendet werden, eine Filterölpumpe kann auch montiert werden.

Mit Wärmetauscher Ersatzrohren für Motoren bis 160 PS geeignet.

Diese Anlage ist nur ca. 2 cm tiefer als die Motorunterseite und läßt sich sogar mit Anhängerkupplung verwenden (siehe Foto).

Die Edelstahl Schalldämpfer werden in Handarbeit produziert (dünner als die Stahl Version).

Lieferung mit Montagesatz aber ohne Wärmtauscher Ersatzrohre.
Hinweis: Wir empfehlen die optionale Befestigung und Ausrichtung der Endrohre mit jeweils 2 Rohrschellen, welche Sie miteinander verbinden.
Hier finden SIe ein Video mit dem Klang vom Auspuff bei Doppelvergasermotoren:
Soundcheck Ahnendorp B.A.S. Streetsport Auspuff mit Doppelvergaser

980,00 EUR

incl. 19% tax excl. Shipping costs

Streetsport Exhaust VW Beetle Stainless Steel VW Beetle Type 1 with preheating

Streetsport Exhaust VW Beetle Stainless Steel VW Beetle Type 1 with preheating

Tube inside diameter 35-41mm, slips over the original heaterboxes, up to round 160HP.
Stainless steel including handmade silencers.

990,00 EUR

incl. 19% tax excl. Shipping costs

Streetsport Silent Exhaust VW Beetle Stainless Steel VW Beetle Type 1

Streetsport Silent Exhaust VW Beetle Stainless Steel VW Beetle Type 1

Streetsport Silent Exhaust VW Beetle Stainless Steel VW Beetle Type 1
Tube inside diameter 35-41mm, slips over the original heaterboxes, up to round 200HP.
Stainless steel including handmade silencers.Tube inside diameter 35-41mm, slips over the original heaterboxes, up to 2500ccm.
Stainless steel including handmade silencers.
Special made silencers to make the make the noise much more silent, also for big engines with race cams to reduce the noise.

1.150,00 EUR

incl. 19% tax excl. Shipping costs

Streetsport Exhaust VW Beetle Stainless Steel VW Beetle Type 1 with preheating - SILENT VERSION

Streetsport Exhaust VW Beetle Stainless Steel VW Beetle Type 1 with preheating - SILENT VERSION

Tube inside diameter 35-41mm, slips over the original heaterboxes, up to round 160HP.
Stainless steel including handmade silencers.
SILENCE VERSION

1.180,00 EUR

incl. 19% tax excl. Shipping costs

Streetsport Y-Stück Stahl Verteilerstück mit DB Killer

Streetsport Y-Stück Stahl Verteilerstück mit DB Killer

Streetsport Y-Stück Verteilerstück mit DB Killer
Dieses Verteilerstück ist speziell für Motoren geeignet, welche durch offene Luftfilter ein zu hohes Gesamtgeräusch entwickeln.
Achtung: erhöhter Abgasgegendruck, Motortemperatur beachten!

280,00 EUR

incl. 19% tax excl. Shipping costs

Ahnendorp B.A.S. tail pipes stainlees for our streetsport exhaust SET

Ahnendorp B.A.S. tail pipes stainlees for our streetsport exhaust SET

Ahnendorp B.A.S. tail pipes stainlees for our streetsport exhaust.
This tail pipes are hand made and special to dit with our streetsport exhaust stainless and steel.
49mm outside, looks like the original tail pipes but to use with our sport exhaust.
Mounting with a screw.
Set = two!
Welded marks are to see a bit!

110,00 EUR

incl. 19% tax excl. Shipping costs

Sebring Style Tail Pipe stainless for serial vw beetle exhaust also serial 30hp exhaust and customsport 30hp exhaust

Sebring Style Tail Pipe stainless for serial vw beetle exhaust also serial 30hp exhaust and customsport 30hp exhaust

Sebring Style Tail Pipe stainless for serial vw beetle exhaust also serial 30hp exhaust and customsport 30hp exhaust.
Tailpipe stainless, handmade with silencer insert.

280,00 EUR

incl. 19% tax excl. Shipping costs

Heaterbox replacement tubes to fit Streetsport and Customsport Steel

Heaterbox replacement tubes to fit Streetsport and Customsport Steel

Heaterbox replacement tubes to fit Streetsport and Customsport Steel, set for one engine

140,00 EUR

incl. 19% tax excl. Shipping costs

Heaterbox replacement tubes to fit Streetsport Customsport Stainless Steel

Heaterbox replacement tubes to fit Streetsport Customsport Stainless Steel

Heaterbox replacement tubes to fit Streetsport and Customsport Stainless Steel, set for one engine

170,00 EUR

incl. 19% tax excl. Shipping costs

Gasket for Streetsport Exhaust System

Gasket for Streetsport Exhaust System

Gasket for Streetsport Exhaust System

24,00 EUR

incl. 19% tax excl. Shipping costs

Header 21145

Roadracing header VW Beetle type 1 stainless

Header VW Beetle type 1 Roadracing stainless.
Recommended for engines over 200 hp.
Tube inside diameter 39-51mm including heaterbox replacement tubes, not usable with heaterboxes

520,00 EUR

incl. 19% tax excl. Shipping costs

NEW Roadracing exhaust system VW Bettle Type 1 completely stainless

NEW Roadracing exhaust system VW Bettle Type 1 completely stainless

NEW VW Bettle type 1 Roadracing exhaust system recommended for engines also over 200 hp.
Tube inside diameter 39-51mm including heaterbox replacement tubes, not usable with heaterboxes.
Header complete stainless, new exhaust with our own, new handmade silencers, completely stainless!
Please see 21149E for more informations about the silencer system.

1.390,00 EUR

incl. 19% tax excl. Shipping costs

VW Type 1 Roadracing silencer system full-stainless, new version!

VW Type 1 Roadracing silencer system full-stainless, new version!

VW Type 1 Roadracing silencer system with stainless tubes and our new handmade stainless silencers.
To fit with headers type 1 headers 21145 and 21132e (streetsport header with pipe to one site).

880,00 EUR

incl. 19% tax excl. Shipping costs

Small Silencer VW Type 1 Bettel and Bus - stainless handmade

Small Silencer VW Type 1 Bettel and Bus - stainless handmade

Small Silencer stainless for Type 1 beetle and Bus, to use with our headers 21145 Roadracing and 21132E (streetsport header).
Dimension silencer : 330x155x108mm
Expensive, but small and lower noice then you ever heard at this size.
Nice, low sound, not loud!
To use up to 2,5 engines.

760,00 EUR

incl. 19% tax excl. Shipping costs

Ahnendorp Exhaust VW Typ 1 Engine Full Racer Stainless

Ahnendorp Exhaust VW Typ 1 Engine Full Racer Stainless

This is our new steinless racingsystem for type 1 engine (picture shows 356 version, we deliver it with the different vw header).
The header can be fit on each motor dimension.
It is also handmade like our other exhausts, this system includes header boxes replacement tubes (also stainless).
The exhaust tube is made from steel with a special inlay.
Lenght of the exhaust tube round 55cm, so the flow will be perfect.
We recomed to use this system only for race use.
It will fit on all tuned engines perfectly.
To fit the system you must modify the car, delivery like the pictures.

1.080,00 EUR

incl. 19% tax excl. Shipping costs

Buggy Trike exhaust type 1 beetle engine Ahnendorp exhaust system stainless - on stock

Buggy Trike exhaust type 1 beetle engine Ahnendorp exhaust system stainless - on stock

Bis jetzt gab es schöne Buggy Trike Auspuffanlagen, die jedoch strömungstechnisch falsch konstruiert waren.
Gute Auspuffanlagen waren leider nicht formschön, Ahnendorp B.A.S. hat jetzt wieder auf Wunsch vieler Buggy und Trike Fahrer eine "Edelstahl" Auspuffanlage neu produziert, die technisch perfekt ist und trotzdem gut und dezent aussieht.
Vor ca. 40 Jahren haben wir die ersten Anlagen in dieser Version erstmalig angeboten!
Natürlich lässt sich die Auspuffanlage mit Original Vergaser und Original Kühlung verwenden.
Sie hat einen sportlichen, nicht störenden Sound.
Die Schalldämpfer sind poliert.
Deutliche Mehrleistung und Drehmoment wird durch den Fächerkrümmer erreicht, dessen abgestimmte Rohrlängen, nach richtiger Zündfolge, in einen messerscharf geschnittenen Kollektor münden.
Die Schalldämpfer sind nicht vibrations- und rissempfindlich, wie so manche hohe Schalldämpfer.
Falls Sie Zweifel haben, ob unsere Auspuffanlage in Ihr Fahrzeug passt - fordern Sie eine Maßzeichnung an.
Um ausreichend Platz zu schaffen, können Verlängerungsstücke für die Stossstange angefertigt werden.
Hier finden Sie Videos, wo Sie den Klang hören können (bitte gute Lautsprecher verwenden!)
Video Ahnendorp Buggy Trike Auspuff Prüfstandslauf HD (Zentralvergasermotor, Fächerkrümmer mit Vorwärmung Sonderabfertigung von uns auf Kundenwunsch)
Video Ahnendorp Buggy Trike Auspuff (Doppelvergasermotor)
Natürlich lässt sich die Auspuffanlage auch mit Original Vergaser und Original Kühlung verwenden.
Sie hat einen sportlichen, nicht störenden aber satten Klang.
Die Schalldämpfer sind hochglanz-poliert.
Deutliche Mehrleistung und Drehmoment wird durch den Fächerkrümmer erreicht, dessen abgestimmte Rohrlängen, nach richtiger Zündfolge, in einen messerscharf geschnittenen Kollektor münden.
Die Schalldämpfer sind nicht vibrations- und rissempfindlich wie so manche hohe Schalldämpfer.
Diese Anlage besteht komplett aus handgefertigten Edelstahlkrümmer, Rohren und Dämpfern.
Lieferung mit Spannbänder für die Schalldämpfer, aber ohne Dichtungen, Anbau oder Montagesatz.

2.600,00 EUR

incl. 19% tax excl. Shipping costs

Original Style Exhaust Full-Stainless VW Beetle 1300-1600 and more

Original Style Exhaust Full-Stainless VW Beetle 1300-1600 and more

Original Style exhaust stainless VW Beetle 1300-1600ccm and more.
Single preheating.
Complete stainless steel!

590,00 EUR

incl. 19% tax excl. Shipping costs

Original Style Exhaust 30hp beetle type 1 engine

Original Style Exhaust 30hp beetle type 1 engine

Original Style Exhaust 30hp beetle type 1 engine
Verkauf wie abgebildet inkl. Endrohre

240,00 EUR

incl. 19% tax excl. Shipping costs

Original Style Exhaust Full-Stainless VW Beetle 1200

Original Style Exhaust Full-Stainless VW Beetle 1200

Original Style exhaust stainless VW Beetle 1200 ccm and more.
Single preheating.
Complete stainless steel!

299,80 EUR

incl. 19% tax excl. Shipping costs

Sport Style Exhaust aluminized VW Beetle up to 1300ccm

Sport Style Exhaust aluminized VW Beetle up to 1300ccm

Sport Style exhaust aluminized VW Beetle up to 1300ccm.
Including mounting set.
Double preheating, for single preheating please order article no. 21174.

Price on request

Sport Style Silencer Exhaust Stainless VW Beetle up to 1300ccm

Sport Style Silencer Exhaust Stainless VW Beetle up to 1300ccm

Sport style silencer exhaust stainless VW Beetle above to 1300ccm.
Without mounting set.
Single preheating, for double preheating please order article no. 21170.

790,00 EUR

incl. 19% tax excl. Shipping costs

Sport Style Exhaust Alu Steel VW Beetle above 1300ccm

Sport Style Exhaust Alu Steel VW Beetle above 1300ccm

Sport Style exhaust alu steel VW Beetle above 1300ccm.

Price on request

Sebring Style Exhaust Stainless VW Beetle typ 1 1200ccm 34hp

Sebring Style Exhaust Stainless VW Beetle typ 1 1200ccm 34hp

Sebring Style exhaust Stainless VW Beetle 1200ccm.
Without mounting set.
Sample picture.

790,00 EUR

incl. 19% tax excl. Shipping costs

Sidewinder Style exhaust type 1 engine

Sidewinder Style exhaust type 1 engine

Sidewinder Style exhaust type 1 engine.
Fit on VW split window T1 and beetle.
42mm system, stainlees steel, very loud sound.
We do not recome this system, but it is to buy for a very nice price.

409,00 EUR

incl. 19% tax excl. Shipping costs

Standard Exhaust VW Beetle

Standard Exhaust VW Beetle

Standard exhaust VW Beetle, without tailpipes, please order seperate.
Please add build year, heading and engine type!!!

105,00 EUR

incl. 19% tax excl. Shipping costs

HD Exhaust VW Beetle 1303

HD Exhaust VW Beetle 1303

HD Exhaust VW Beetle 1303, without tailpipes, please order seperate.
SALE!

190,00 EUR

incl. 19% tax excl. Shipping costs

Tailpipe for VW Beetle Standard Exhaust

Tailpipe for VW Beetle Standard Exhaust

Tailpipe for VW Beetle Standard Exhaust, price for one piece

12,00 EUR

incl. 19% tax excl. Shipping costs

TDE Tuning Theo Decker Tailpipe for VW Beetle Standard Exhaust, SET

TDE Tuning Theo Decker Tailpipe for VW Beetle Standard Exhaust, SET

TDE Tuning Theo Decker Tailpipe for VW Beetle Standard Exhaust, price for a set of 2 p/c.
28mm inside, much lower sound.
The best way to modify a standard exhaust.
Outside 35mm

Price on request

Exhaust Gasket VW Beetle Standard 32mm, Set

Exhaust Gasket VW Beetle Standard 32mm, Set

Exhaust gasket VW Beetle standard 32mm, set for one engine

5,36 EUR

incl. 19% tax excl. Shipping costs

Exhaust Gasket VW Beetle up to 38mm , Set

Exhaust Gasket VW Beetle up to 38mm , Set

Exhaust gasket VW Beetle up to 38 mm, set for one engine

18,00 EUR

incl. 19% tax excl. Shipping costs

Gasket for preheating single intake-pipeeach

Gasket for preheating single intake-pipeeach

Gasket for preheating single intake-pipeeach

7,95 EUR

incl. 19% tax excl. Shipping costs

Mounting Set for VW Beetle Standard Exhaust

Mounting Set for VW Beetle Standard Exhaust

Mounting Set for VW Beetle Standard Exhaust

28,00 EUR

incl. 19% tax excl. Shipping costs

Mounting Set for VW Beetle Standard Tail Pipe

Mounting Set for VW Beetle Standard Tail Pipe

Mounting Set for VW Beetle Standard Tail Pipe, for one piece

8,00 EUR

incl. 19% tax excl. Shipping costs

Heizschlauchverbinder vom Gebläsekasten zum Wärmetauscher Customsport Streetsport, 50 mm

Heizschlauchverbinder vom Gebläsekasten zum Wärmetauscher Customsport Streetsport, 50 mm

Heizschlauchverbinder vom Gebläsekasten zum Wärmetauscher Customsport Streetsport, 50 mm.
Diese Verbinder ermöglichen es beim Typ 1 Motor unter Verwendung unserer Customsport und Streetsport Auspuffanlagen die Heizungsschläuche am Motorabschlussblech zu trennen.
Dadurch ist zum Beispiel oberhalb im Sichtbereich die Verwendung von Pappschlauch möglich und unterhalb Alu-Feran oder Edelstahl.
Es gibt so keine Probleme mit zu heißen Pappschläuchen.
Lieferung = 2 Stück, optionale Schellen bitte zusätzlich bestellen.

8,00 EUR

incl. 19% tax excl. Shipping costs

Heizschlauch vom Gebläsekasten zum Wärmetauscher, 50 mm

Heizschlauch vom Gebläsekasten zum Wärmetauscher, 50 mm

Heizschlauch vom Gebläsekasten zum Wärmetauscher, 50 mm.
High Quatlity paper hose for alle aircooled VW Beetle and Van.
For easiest connection from heater pipe to fanhouse.
Length 1000mm
2 hoses per car needed

8,00 EUR

incl. 19% tax excl. Shipping costs

Mounting Set for VW Beetle heaterbox

Mounting Set for VW Beetle heaterbox

Mounting Set for VW Beetle heaterboxes, set for both heaterboxes left and right

24,00 EUR

incl. 19% tax excl. Shipping costs

Alu Feran air hose for Beetle and Van 50mm diameter

Alu Feran air hose for Beetle and Van 50mm diameter

High Quatlity Alu Feran hose for alle aircooled VW Beetle and Van.
For easiest connection from heater pipe to fanhouse.
Compressed length 410 mm, exented length 100cm
2 hoses per car needed.

10,00 EUR

incl. 19% tax excl. Shipping costs

Alu Feran air hose for Beetle and Van 50mm diameter Black

Alu Feran air hose for Beetle and Van 50mm diameter Black

High Quatlity Black Alu Feran hose for alle aircooled VW Beetle and Van.
For easiest connection from heater pipe to fanhouse.
Compressed length 410 mm, exented length 100cm
2 hoses per car needed

25,00 EUR

incl. 19% tax excl. Shipping costs

Heaterboxes VW Beetle Standard, Set

Heaterboxes VW Beetle Standard, Set

Heaterboxes VW Beetle standard, set for one engine, for all engines up to 30hp, can be used up to 120hp.
Hinweis: die Beschichtung der Wärmetauscher kann durch unterschiedliche Produktionsdaten link/rechts optisch leicht abweichend sein.

320,00 EUR

incl. 19% tax excl. Shipping costs

Heaterboxes VW Beetle Alu HD, Set

Heaterboxes VW Beetle Alu HD, Set

Heaterboxes VW Beetle Alu HD, set for one engine, to fit for 1200-1600ccm
Hinweis: die Beschichtung der Wärmetauscher kann durch unterschiedliche Produktionsdaten link/rechts optisch leicht abweichend sein.

360,00 EUR

incl. 19% tax excl. Shipping costs

Heaterboxes VW Beetle High Performance 35 / 38mm, Set

Heaterboxes VW Beetle High Performance 35 / 38mm, Set

Heaterboxes VW Beetle High Performance, set for one engine, to fit for 1200-1600ccm.
Very light version, larger inside diameter, without alu heater core.
Hinweis: die Beschichtung der Wärmetauscher kann durch unterschiedliche Produktionsdaten link/rechts optisch leicht abweichend sein.

360,00 EUR

incl. 19% tax excl. Shipping costs

Heaterboxes VW Beetle High Performance 42mm Alu/HD, Set

Heaterboxes VW Beetle High Performance 42mm Alu/HD, Set

Heaterboxes VW Beetle High Performance Alu/HD, set for one engine, to fit for 1200-1600 ccm basic from 1960 and later.
Very light version, larger inside diameter.
Sample picture!!!

430,00 EUR

incl. 19% tax excl. Shipping costs

High Temperature Aerosol Exhaust Paint Spray Black

High Temperature Aerosol Exhaust Paint Spray Black

High Temperature Aerosol Exhaust Paint Spray Black

17,00 EUR

incl. 19% tax excl. Shipping costs

Kupfermuttern für Auspuffstehbolzen VW Typ 1 Motor, Satz

Kupfermuttern für Auspuffstehbolzen VW Typ 1 Motor, Satz

Kupfermuttern für Auspuffstehbolzen VW Typ 1 Motor, Satz

8,00 EUR

incl. 19% tax excl. Shipping costs

Exhaust, Sport. For VW Type 1 Beetle with Porsche 356 engine

Exhaust, Sport. For VW Type 1 Beetle with Porsche 356 engine

Ever thought of swapping your VW Beetle engine to a Porsche 356 engine? Surely, many did think of this, and several have already done so. Therefore, a modified exhaust is also necessary since the Beetle body is narrower than the Porsche 356. Using our popular 356 muffler; shortening length to 695 mm, changing the position of the outlets, welding in new shortened stainless TT tailpipes – matching exactly the original cut outs in the rear valence. The final treatment is a heat protective paint to.

The VW Beetle holds a special place in our hearts. So does the Porsche 356. That's why we absolutely love when people merge the two cars.
Combining the two cars is not always as easy as it should be. That is why we have used our competences, knowhow, and passion to create a new exhaust system, tailormade for to combine the iconic VW, with the Porsche Engine.

VW Type 1 with Porsche 356 eng.

1.2-1.6

08/67-12/86

550,00 EUR

incl. 19% tax excl. Shipping costs

VW Beetle Type 1 Exhaust set, Performance, with two tail pipes and high performance heat exchangers. Exhaust and tail pipes made of stainless steel, heat exchangers of steel with black paint

VW Beetle Type 1 Exhaust set, Performance, with two tail pipes and high performance heat exchangers. Exhaust and tail pipes made of stainless steel, heat exchangers of steel with black paint

Exhaust set, Performance, with two tail pipes and high performance heat exchangers. Exhaust and tail pipes made of stainless steel, heat exchangers of steel with black paint

Set consisting of performance heat exchangers with aluminium casting in OD42mm and exhaust in OD 42mm piping. With heating fins. Supplied with 4 loose flanges to ensure a perfect fit from heat exchanger to exhaust. Flanges must be tack-welded on outside and fully welded on inside since the limited space for washer and nut on studs. Adjustable stainless steel tail pipes will finish the look on the car.

VW Type 1 1.2-1.6 (25-37 kW) 12/62-12/86

1.000,00 EUR

incl. 19% tax excl. Shipping costs

VW Beetle Type 1 Exhaust set, Performance, with two tail pipes and high performance heat exchangers. Exhaust and tail pipes made of stainless steel, heat exchangers of steel with grey paint

VW Beetle Type 1 Exhaust set, Performance, with two tail pipes and high performance heat exchangers. Exhaust and tail pipes made of stainless steel, heat exchangers of steel with grey paint

Exhaust set, Performance, with two tail pipes and high performance heat exchangers. Exhaust and tail pipes made of stainless steel, heat exchangers of steel with grey paint

Set consisting of performance heat exchangers with aluminium casting in OD38mm and exhaust in OD 42mm piping. Supplied with 4 loose flanges to ensure a perfect fit from heat exchanger to exhaust. Flanges must be tack-welded on outside and fully welded on inside since the limited space for washer and nut on studs. Adjustable stainless steel tail pipes will finish the look on the car.

VW Type 1 1.2-1.6 (25-37 kW) 12/62-12/86

1.015,00 EUR

incl. 19% tax excl. Shipping costs

1 to 67 (from a total of 67)